How to hide a gas boiler, floor or wall-mounted? Choosing a place: in the kitchen or in the living room - in a niche, in a closet or in a kitchen unit, selection of ideas and good photos

Types of boilers

Manufacturers of gas heating systems care about the appearance of their products. Most modern units boast compact sizes, and their design is not much different from the design of household appliances. Therefore, in many cases, owners will not have to think about how to hide a gas boiler in the kitchen. The characteristics and functionality of gas boilers presented on the Russian market are diverse and determine the following types of products:

Single and double circuit. Units with one circuit heat water for the heating system (batteries). Double-circuit devices not only provide heating, but also serve to heat water.

Design in a small kitchen Source kakpostroit.su

Models vary in power and placement method: floor-mounted or wall-mounted.
Models are equipped with an automatic or manual ignition system.

Floor model Source www.tproekt.com

Models differ according to the type of boiler. Compact and ergonomic boilers with a built-in boiler are suitable for the kitchen. The functionality of the unit can be easily expanded by equipping it with an external indirect heating boiler.

A complete part of the interior Source www.byroclimata.ru
An important indicator that determines how the boiler and pipes will be decorated in the interior is the type of combustion chamber. There are models with a closed and open (atmospheric) burner.

Closed-type boilers are the simplest and most silent devices with a burner, above which there is a coil with coolant. The atmospheric air in the room is used to burn the fuel. Some models can be equipped with an air duct and take air from the street. Closed-type devices require a chimney, which is why they are used mainly in private homes.

In the corner kitchen Source vsetke.ru

In apartments where it is impossible to install a chimney, safe models with a closed chamber are common. Such designs are characterized by greater productivity and less toxic smoke when compared with atmospheric burners. To remove smoke outside the kitchen, use a horizontal chimney.

In this case, when deciding how to hide a gas boiler in the kitchen, take into account the presence of a chimney. The optimal location method seems to be to install the gas system as close as possible to the point where the pipe exits to the street. Such a device can be hidden in a pencil case, wall cabinet, or installed in a niche.

Set with internal placement of the boiler Source gearbestblog.ru

Masking communications

When designing a kitchen that contains a gas heating system, you also need to think about how to hide the pipes through which water circulates and gas enters. There are several possibilities for camouflage in a kitchen with a heating boiler; the design must be based on current SNiP standards.

The pipe blends into the background Source i0.wp.com

The rules do not allow the placement of pipes under permanent structures or in a fine. Even if the owners decide to ignore the rules and tightly close communications, such a project will not last long. The very first inspection of the gas service will result in a fine, and the owners will be obliged to redo the structure in accordance with the standards.

In the design of a blue and white kitchen Source img11.postila.ru

The pipes and gas boiler may be covered with a removable box, provided that access to the valve remains free. The box consists of a metal frame covered with sheets of fire-resistant plasterboard or chipboard. The outer walls of the structure are designed in accordance with the style of the interior, matching the color of the finishing or kitchen facades.

In an individual box Source i2.wp.com

Hiding the set in the kitchen cabinet

If the decision is made to place the gas apparatus in the hinged element corresponding to the one provided, then a stumbling block immediately appears. When a boiler is installed inside designer kitchen furniture, the main problem is the need to make the cabinet according to individual dimensions. Next, we will describe the process of manufacturing such a link from chipboard.

Tools and accessories that will be useful in the work are listed below:

Roulette;
Jigsaw;
Furniture self-tapping bolts;
Electric drill with drills and wood bit;
Set of hexagons;
Chipboard;
Two slats;
Standard kitchen front, that is, a door of the desired color;
Two furniture hinges;
Cabinet canopy kit;
Iron and furniture decorative tape-edging.

Let's start the procedure:

First of all, we find out the dimensions of the gas boiler. We accept the required dimensions of the future cabinet according to the following principle: the distance between the sides of the heat generator and the walls of the furniture must be at least 3 cm. The same applies to the bottom and top. Thus, we add 6 cm to the dimensions of the gas unit and select the nearest standard facade size from the series in the spirit of which the set is made.
We purchase this door along with the hinges. It’s good if it has an unusual, ventilating decor.
Using a jigsaw, we evenly cut out the side walls from the chipboard. In this case, the depth of the cabinet should also be at least 3 cm greater than the corresponding size of the boiler.
Similarly, we cut out the bottom and top of our box. But in one of these elements you will have to make a cutout in advance for the boiler communications to exit. This depends on the specific case.
In one of the manufactured sidewalls we use a crown to make recesses for furniture hinges.
Read also: Instantaneous electric water heater Delimano
One option: building lockers around
We assemble the cabinet. To connect each pair of walls, we drill two holes for furniture bolts, placing the elements next to each other.
Advice. Perpendicularity must be maintained during assembly. To do this, when drilling each pair of walls, you should use a square and a regular stool. Having placed one wall on the seating surface, we place the second one vertically, apply a square and drill according to the markings. Here it is also advisable to use the help of a partner.
We connect the cabinet elements with furniture hex bolts. Instead of the back wall, we screw two slats: one on top, the other on the bottom. If this is not done, the box will remain shaky. However, some of these slats may have to be moved a little away from the edge - depending on how its communications extend from the boiler.
On the top beam we attach elements for fastening to the wall of the apartment.
Using a heated iron, we glue the noticeable ends of the sawn walls with furniture edging tape.
We hang the front on the cabinet.
All. Now you can carefully slide the created unit of the set directly onto the boiler and attach this furniture to the kitchen wall.

Gas boiler inside cabinet

How to hide a boiler

The easiest way to solve the question of how to close the boiler in the kitchen is if the kitchen is under renovation. In this case, it is easier to order a furniture set, the dimensions of which will allow you to install the equipment discreetly and safely.

Behind the beige façade Source futes-szereles-budapest.hu

To make furniture, specialists need to know which boiler model needs to be hidden; The equipment instructions list acceptable options and usually contain distance requirements. If equipment is purchased for a ready-made interior, you can use several ways to disguise it.

In a country style kitchen Source static1.abitant.com

It is almost impossible to hide a heating device in ready-made (standard) cabinet furniture, since it is larger than kitchen modules. A common solution is to place the mounted unit in a specially made hanging box.

When manufacturing, you should remember the operating conditions of gas equipment: the distance between the walls of the furniture and the boiler, the presence of ventilation holes, the use of non-combustible materials for interior decoration. The box should have no back wall, and in appearance it should resemble a regular cabinet and blend harmoniously with the rest of the kitchen furniture.

Doesn't need disguise Source img5.lalafo.com

Deciding on how to hide a floor-standing gas boiler in the kitchen is somewhat more difficult, since floor-standing models are often larger than wall-mounted ones. To completely hide the unit and communications from view, and preserve the interior of the kitchen, sometimes a box in the form of a pencil case is built, consistent with the design of the room.

Installation in a pencil case Source avatars.mds.yandex.net

The pencil case should not only be beautiful, but also safe from the point of view of use, as well as protection from curious children. To disguise floor equipment, you can also order a kitchen set, however, for this you will have to sacrifice significant internal space - it is unlikely that you will be able to place anything useful in a pencil case.

In the corner cabinet Source i.ytimg.com

Rules and regulations to consider

Gas boilers are not simple devices and require compliance with certain installation rules. First of all, for its installation you need permission from gas services. When the equipment is in good working order and the chimney is clean, then there should be no problems. Further, if you do not want problems with the governing bodies, you must adhere to the following rules:

gas boilers are installed only in non-residential premises, such as the kitchen;
ventilation is required;
the kitchen should be separated from other rooms by doors;
the room must have at least one window;
finishing, in particular the ceiling, must be made of non-combustible materials. It is prohibited to use a gas boiler with suspended ceilings, because if they ignite, additional harmful fumes may occur;
when installing the boiler between cabinets, you need to provide space for free air circulation;
if the ceilings in the house are wooden, then the wall behind the boiler is covered with a sheet of metal.

Standards for distances between the boiler and kitchen items are also observed:

from the boiler to the floor - 80-160 cm, from the ceiling - 80 cm;
from the walls of the “camouflage cabinet” on the sides - at least 5 cm, in front - from 10 cm. The boiler in the cabinet must be closed with a door with a grill;
to household electrical appliances and stoves - at least 30 cm;
from the meter must be placed at a distance of 1.6 m or more;
The socket for connecting the device is located at a distance of 1 m.

A gas boiler in the kitchen can be hidden, but do not forget about the standards.
The room in which the boiler will be installed must be at least 4 m2, the ceiling height is from 2.5 m. The power of the gas appliance is selected no more than 60 kW and it is advisable to install sensors for notification of gas leaks.

Boiler as part of the interior

Not all owners want to hide the gas boiler out of sight; many consider it possible to play up its presence in the interior in various ways (especially if it is a wall-mounted option). If the unit has not yet been purchased, it is possible to choose a color that harmonizes with the wall decoration or furniture facades.

Game of contrasts Source i.ytimg.com

Of course, most models are available in classic white, but you can also find a more exotic option - black or chrome. The opposite approach is also possible - a furniture set is ordered to match the color of the heating device.

Accent on a bright wall Source i1.wp.com

When designing a kitchen design with a gas boiler on the wall, it is important to take into account the features of the room and furniture arrangement options. An easily implemented method is to install a gas boiler in a niche between pieces of furniture; It would be good if the boiler can be installed in the corner of the kitchen, between the wall cabinets. A carefully selected color palette of finishing and facades will make such a unit almost invisible.

In the niche by the sink Source kitchendecorium.ru

You can fit the boiler into the surrounding space in other ways. Sometimes it is covered with film or painted, but such experiments are carried out on old, well-worn models. Creative design of a new device may void the service warranty.

In the same style Source veronaplusgroup.ru

Gas equipment does not always need any camouflage. In some styles, the unit can turn into an appropriate element of the interior. For example, camouflage is not required in an interior designed in a loft style. The trick of industrial design is the use of utilities; Any cauldron, from the most ancient to the modern, will look appropriate here. When creating a high-tech interior, you cannot do without the latest generation unit, with an ergonomic shape and a chrome-plated body.

In the loft interior Source vasha-mebel.shop