STEEL GAS BOILER “LEMAX” PREMIUM SERIES
The LEMAKS boiler is made of high-quality 2 mm steel with increased flatness from the Magnitogorsk Iron and Steel Works.
The heat exchanger has a cylindrical shape, which allows the boiler to operate in closed systems with an operating pressure of 2 atm. Thanks to the coating with anti-corrosion heat-resistant enamel “CERTA” (exposure temperature up to 750°C) and treatment with an inhibitory compound, the heat exchanger is protected from aggressive factors: salt solutions, mineral oils.
STEEL BOILER LEMAX PREMIUM 7.5 WITH AUTOMATIC NOVA 630 SIT
More details
Advantages:
- The boiler does not require connection to the electrical network;
- Expanded power range from 7.5 to 60 kW;
- The presence of a system against overheating, interruption of draft, soot formation, as well as against blowing out of the boiler;
- Convenience of boiler maintenance due to the use of removable cladding elements and profile equipment;
- Ease of cleaning the boiler due to the use of a removable top panel;
- Improved safety protection system (heat exchanger overheat sensor installed);
- Maximum efficiency due to increasing the heat exchange area and changing the design of the turbolizer for maximum retention of exhaust gases;
- It is possible to connect a room thermostat, with which you can regulate the boiler temperature relative to the indoor temperature;
- Hot water function;
- Increased primary and secondary air flow;
- 3 year warranty;
Specifications:
STEEL GAS BOILER “LEMAX” OF THE “PREMIUM” SERIES WITH AUTOMATION 820 NOVASIT
STEEL BOILER LEMAX PREMIUM 7.5 N WITH AUTOMATIC NOVA 820 SIT
More details
Additional benefits:
- The temperature regulator is located on the front panel of the boiler with temperature indications, which allows you to accurately select the optimal temperature regime;
- Connection of a room thermostat, with which you can regulate the boiler temperature relative to the indoor temperature;
- Work together with the Lemax turbo nozzle for forced removal of exhaust gases;
- Soft start system.
Specifications:
Recommendations for use - how to turn on a gas boiler correctly
Before lighting the Lemax boiler, you need to make sure that there is water inside it and other elements of the heating system. Next, they check the level of traction and select the most optimal algorithm of action. Its formation is influenced by the power of the equipment and the presence of automatic units. The Lemax boiler is classified as non-volatile, so the problem of how to ignite a Lemax gas boiler is solved using conventional piezo ignition. Some models have a special traction sensor, which ensures safe operation of the device.
To connect a boiler like this to a heating system, you don’t need any special skills. In addition, no special care is required during operation, and minor faults can be eliminated with your own hands. To avoid surprises during startup, you must always check all your actions with the manual on how to light a Lemax gas boiler.
List of actions on how to turn on a Lemax boiler with automation:
- Open the gas tap.
- Set the control knob to the ignition position.
- Press the handle all the way for 10 - 60 seconds until the burner lights up.
- Conduct temperature adjustment.
Boiler equipment of this type is capable of heating a home or other room of any size. Each of the Lemax models is equipped with a special automatic filling, which allows, in case of exit from the normal operating mode, to turn off the Lemax boiler, as required by the instructions.
STEEL GAS BOILER “LEMAX” SERIES “PREMIUM” 70-100
STEEL BOILER LEMAX PREMIUM 70 WITH AUTOMATIC NOVA 820 SIT
More details
The LEMAKS boiler is made of high-quality 3 mm steel with increased flatness from the Magnitogorsk Iron and Steel Works. Thanks to the coating with anti-corrosion heat-resistant enamel “CERTA” (exposure temperature up to 750°C) and treatment with an inhibitory compound, the heat exchanger is protected from aggressive factors: salt solutions, mineral oils.
Advantages:
- Temperature regulators are located on the front panel, which allows you to accurately select the thermal mode;
- Availability of a protection system against overheating, traction interruption and soot formation;
- Maximum efficiency due to: increasing the heat exchange area, changing the design of the turbulator for maximum retention of exhaust gases;
- It is possible to connect a room thermostat, with which you can regulate the boiler temperature relative to the indoor temperature;
- Two independently operating gas valves 820 NOVA SIT;
- The boiler does not require connection to the electrical network;
- An overpressure valve of 3 atm is installed;
- Increased primary and secondary air flow;
- 3 year warranty.
Specifications:
INSTALLATION EXAMPLES
- boiler;
- circulation pump ;
- expansion tank;
- heating radiators;
- automatic air release;
- relief safety valve;
- skimmer;
- tap for filling and draining the heating system.
- boiler;
- expansion tank;
- Radiator;
- ball valve for turning off the heating in the summer;
- tap for draining and filling the system;
- cold water tap for hot water supply;
- hot water outlet;
- winter-summer ball valve;
- bugle;
- relief safety valve.
How the Lemax boiler works and how it works
The location of Lemax's enterprises is the Russian city of Taganrog. The supply of main components for boiler equipment assembled at our own facilities is carried out by both Western and domestic partners. The production of the heat exchanger and housing is mainly carried out by Russian enterprises, while control units, automation and burners come from abroad.
Boilers of this type can be equipped with both open and closed combustion chambers. There are always pressure and temperature regulators on the body of the units. As a rule, you can turn on a Lemax boiler not only from the mains: some models do not depend on electrical energy at all. According to safety regulations, a Lemax device must always be connected to a chimney. Only rooms with good ventilation are suitable for installing the equipment.
A characteristic feature of Taganrog devices is the simplicity of the procedure for lighting a Lemax boiler. Regardless of how many circuits this equipment serves, and what kind of material was used for its manufacture, connecting it to the electrical network usually does not cause any particular difficulties. A prerequisite is the use in the circuit of how to turn on a Lemax gas boiler, a voltage stabilizer (any surge can cause a breakdown of the device).
The Lemax boiler consists of the following components:
- Gas burner.
- valves.
- Control boards.
- Expansion tank.
- Circulation pump.
Equipment of this type operates mainly on gas, where the heat exchanger is heated due to the operating burner. The design also includes a coil designed to supply hot water. Both natural and forced methods can be used to circulate coolant in the circuit.
STEEL GAS BOILER “LEMAX” WITH CLOSED COMBUSTION CHAMBER “PARIOT” SERIES
STEEL BOILER LEMAX PATRIOT 7.5 WITHOUT CHIMNEY
More details
The “LEMAX” boiler of the “PATRIOT” series is designed to work with natural and forced heating systems without connecting to the electrical network. The flueless design allows the boiler to be installed both in a house and in an apartment. In this case, combustion air is taken from outside the room. The rectangular heat exchanger is made of high-quality steel 2 mm of increased plane from the Magnitogorsk Iron and Steel Works. Thanks to the coating with anti-corrosion enamel “CERTA” (exposure temperature 750°C) and treatment with an inhibitory compound, the heat exchanger is protected from aggressive environments: salt solutions, mineral oils.
ADVANTAGES:
- Power range from 6 to 20 kW;
- Closed (sealed) combustion chamber;
- Convenience of boiler maintenance due to the use of removable cladding elements and profile equipment;
- Equipped with a gas valve from the Italian concern “SIT” and an injection microtorch burner “POLIDORO”;
- Availability of a boiler overheating protection system;
- A special smoke removal design ensures the operation of the boiler;
- The holes on the front panel of the boiler create a convection effect;
- Observation window for monitoring the combustion of the main and ignition burners;
- Coaxial smoke removal system (stainless steel available);
- 3 year warranty.
Brand Lemax
Today, Lemax is the largest manufacturer of heating equipment, mainly specializing in gas boilers. It was opened in the city of Taganrog in 1992 and within a few years it grew from a small manufacturer into a reputable company.
At the very beginning of its activities, it acted as an intermediary between manufacturers and buyers, and after a while it became a large manufacturer of boilers, radiators, boilers and other related equipment. The company's dealers work successfully not only in Russia, but also abroad.
The manufacturer offers a large line of heating equipment , but floor-standing gas boilers have gained the greatest popularity and demand.
CAST IRON GAS BOILER “LEMAX” SERIES “LEADER”
The LEMAKS boiler is made of high-quality gray cast iron, 4 mm thick, produced by VADRUS (Czech Republic). The heat exchanger is treated with an inhibitory compound that prevents corrosion. The boiler does not require connection to the electrical network. Designed for heating residential premises up to 500 sq.m.
CAST IRON BOILER LEMAX LEADER-16 (16 KW)
More details
Advantages:
- Power range from 16 to 50 kW;
- Maximum operating pressure 4 bar;
- High efficiency – 91%;
- Equipped with a gas valve from the SIT concern (Italy);
- Availability of a protection system against overheating, traction interruption, and soot formation.
Specifications:
