Recently, along with traditional thermal insulation materials, liquid thermal insulation has been in high demand. When covering surfaces, the substance simultaneously acts as an effective insulation, waterproofing agent and attractive facade paint, covering the walls with a uniform polymer layer.
One of the most effective in protecting concrete, metal, and brick structures is Bronya ultra-thin thermal insulation. Moreover, the material can be applied to both internal and external surfaces, since its components are absolutely safe for health.
Manufacturer
Thermal insulation Bronya is produced by the Volgograd Innovation Resource Center. VIRC has extensive experience in the development of high-tech thermal insulation materials.
All products offered by the company are officially certified and guarantee excellent quality and highly effective results.
When noting the manufacturer, one cannot fail to mention the optimal price-quality ratio.
Heat insulator brands
The manufacturer presents several main options for liquid heat insulation.
Classic
Bronya Classic is a universal insulating substance that is ideal for processing traditional coatings.
Withstands exposure to elevated temperatures up to 200 °C.
Armor Anticor
Effective for insulating metal surfaces.
It can be applied directly to materials that contain signs of developing corrosion processes, without pre-treatment with anti-corrosion substances.
Facade
Bronya Facade - reliably insulates rooms from the inside, without interfering with full air circulation, which avoids the appearance of rot and the formation of fungi.
Armor Winter
The mixture allows you to insulate objects at low temperatures down to -35 oC.
Compound
Liquid thermal insulation includes the following components:
- acrylic binders;
- a composition of fixatives and catalysts;
- special additives, the presence of which helps create protection against the development of corrosion and the appearance of fungus;
- ultra-thin ceramic microspheres filled with rarefied air.
The presence of such a combination turns liquid insulation into an extremely light, pliable substance that reliably covers surfaces. The consistency of liquid Bronya is in many ways similar to ordinary facade paint. However, after complete hardening, it forms an elastic polymer coating that has high insulating and anti-corrosion properties.
Liquid thermal insulation Bronya Zima / Bronya Zima NG
Ultra-thin thermal insulation “Bronya Zima” / “Bronya Zima NG” is supplied in the following containers:
| 10 liters | 20 liters |
| 4500 rub. | 9000 rub. |
| 4800 rub. (NG) | 9600 rub. (NG) |
“Armor Winter” modification has a flammability group of “G1” . If you require a material with the flammability group “NG” , then we offer to your attention a similar modification “Armor Winter NG”
Liquid ceramic thermal insulation coating “Bronya Zima” / “Bronya Zima NG” , which has increased vapor permeability, is specially designed for thermal insulation of various surfaces (metal, plastic, concrete, brick, wood, etc.) at negative temperatures (up to - 35 ° C ) heat-insulated surface and ambient air.
This modification can be applied in a layer up to 1 mm thick per day. For example, in order to obtain a thermal insulation coating “Bronya Zima” / “Bronya Zima NG” with a total thickness of 2 mm, it is necessary to apply 2 layers 1 mm thick with interlayer drying for 24 hours, thereby saving time and reducing the cost of work. Liquid thermal insulation “Bronya Zima” / “Bronya Zima NG” can be applied with a paint brush , spatula , or Graco airless sprayer .
Laboratory consumption of liquid thermal insulation “Bronya” is 1 liter per 1 sq.m of heat-insulated surface with a layer thickness of 1 mm. When applying liquid thermal insulation to a surface with an area of more than 100 sq.m, it is recommended to allow for an overconsumption of 10% if the application is planned to be done with a brush or spatula. From 10% to 30% (Depending on the professionalism of the painter and weather conditions), material consumption may increase when applied with an airless sprayer.
Before applying the thermal insulation material “Bronya Zima” / “Bronya Zima NG” , it must be brought to working viscosity with the solvent “Orthoxylolol” .
Work on applying the heat-insulating coating “Bronya Zima” / “Bronya Zima NG” is allowed to be carried out at temperatures of the heat-insulated surface and ambient air from -35 to +30°C. After the material has completely dried and polymerized, the resulting thermal insulation coating can be used at temperatures from –60°C to +90°C.
Based on the Bronya Zima / Bronya Zima NG , produced using only imported raw materials, the budget modification Bronya Nord - the result of the successful use of import-substituting technologies in production. The budget modification is similar in its thermal properties to the “Bronya Zima” / “Bronya Zima NG” , but has a maximum peak operating temperature limitation of +70°C .
Instructions for using the material can be found in the “Instructions”
Material quality
Bronya thermal insulation prepared for use has the appearance of a viscous, relatively thick substance. The main part of the substance (about 80%) is formed by air-containing ceramic microgranules. Together with binding acrylic polymers, the granules create a viscous mass that can be diluted with ordinary water, thereby creating a moisture-impermeable, lightweight and durable film.
As for the heat transfer coefficient, here this figure is no more than 0.018 W/m2. Currently, this is a record characteristic for liquid thermal insulation materials.
Insulation Armor practically does not absorb moisture. The indicator of its absorption with the full content of the insulator in water throughout the day is equal to a scanty 0.02 g/cm3. This quality shows how effective a waterproofing agent this substance is.
The material does not burn, and due to its complex chemical structure it is not damaged by insects and other small pests.
Liquid thermal insulation has excellent adhesion. The material effectively covers any surface: brick, concrete, wood, metal, plastic and even glass. A completely hardened thermal insulator is converted into the thinnest film, which, despite the minuscule width of the layer, reliably protects objects from loss of thermal energy.
Another important point is the ease of application of the insulating base. You can cope with the task using a regular brush, roller, spatula or spray.
As for the consumption of liquid heat insulator, in laboratory conditions this figure is equal to one liter per 1 m2 when the substance is applied in a layer of 1 mm. Depending on the presence of certain conditions, the thickness of the insulating coating may vary.
Options
The technical characteristics of the material are as follows:
- Appearance: homogeneous, smooth matte white surface.
- The resistance of the material to temperature changes is in the range from -40 to 60 °C.
- The service life of the insulating layer when processing metal, brick, and concrete surfaces in temperate climates (using the example of Moscow) is about 15 years.
- The permeability coefficient for water vapor is 0.003 mg/m2.
- The maximum permissible operating temperature of the insulating coating when short-term peak values are reached is no more than 260 °C.
- The density of liquid thermal insulation at room temperature is 600±10% kg/m3.
- pH value – from 7.5 to 11 pH.
- The mass fraction of volatile substances is about 40%.
- The time required for the liquid thermal insulation layer to completely harden at room temperature is no more than 24 hours.
- The level of adhesion to concrete, metal, brick surfaces ranges from 1.3 to 2.2 MPa.
- The resistance of the insulating coating to water, 5% alkaline solution at room temperature - the appearance and properties remain unchanged.
Thermal insulation Bronya Facade
Apply to concrete surfaces 1 mm at a time!
Ultra-thin thermal insulation Bronya Facade. For the first time in the world, an ultra-thin ceramic thermal insulation material has been developed that can be applied in layers of 1 mm thickness at a time, and has the vapor permeability of high-quality façade paint. Ultra-thin thermal insulator Bronya Facade - designed specifically for concrete surfaces. Thanks to its high heat-reflecting qualities and reduced labor costs for application compared to similar ultra-thin thermal insulators by AT LEAST TWICE, it will be an ideal solution in the field of professional construction thermal insulation for you and your clients.
Ultra-thin thermal insulation Bronya Facade is an ultra-thin liquid ceramic thermal insulation material that can be applied in layers from 1 mm to 3 mm thick at a time (depending on application modes), and has the vapor permeability of high-quality facade paint (0.03). Bronya Facade is a weather-resistant, highly viscous composition specially designed for thermal insulation of vertical surfaces. The coating, applied to the wall from the inside or outside, forms a single seamless surface, retains heat throughout the entire volume of the room, which has a positive effect on the microclimate.
Bronya Facade coating reflects up to 80% of the visible solar and infrared radiation spectrum. This leads to a significant reduction in heating of interior spaces in the summer, air conditioning costs, and in cold times it can reduce heat loss by up to 30%. Thermal insulation coating Bronya Facade is a durable material with high adhesion to any building materials, along with good vapor permeability, it has hydrophobic (water-repellent) properties.
Liquid ceramic heat insulator Bronya Facade is used for thermal insulation of plastered, concrete, brick, wooden and other surfaces of building envelopes and structures during external and internal work. Ceramic heat insulator Bronya Facade can be coated on top with acrylic paint based on water dispersion; wallpapering is allowed. Tinting Bronya Facade is permissible only subject to strict adherence to our technical map, following our recommendations for the selection of tinting pastes and technical nuances.
The use of Bronya Facade coating allows you to:
- perform thermal insulation of walls both outside and inside;
- maintain the volume of usable space (with thermal insulation of the walls from the inside);
- do not increase the load on the building structure;
- isolate facades with complex architectural solutions (including during reconstruction work);
- increase the temperature comfort of the room;
- reduce costs and time for construction work.
Thermal insulating paint Bronya Facade also showed excellent results together with the modification Bronya Anticorrosive. For example, the calculated thickness of ultra-thin thermal insulation for a ferrous metal tank is 2.5 mm. mascoat, alfatek, tsm ceramic, thermal top, etc. , like our basic modification Bronya Classic, it was necessary to apply at least 6 layers (1st layer of primer + 5 layers of 0.5 mm each with 24 hours drying between layers. Our solution is only three layers (!): 1st layer : 0 .5 mm Bronya Anticorrosive (Not only fixation of corrosion but also a converter, adhesive agent and waterproofing (due to the high rate of film formation). 2nd layer , after 24 hours - 1 mm Bronya Facade 3rd layer, after 24 hours - 1 mm Armor Facade
Ultra-thin thermal insulation Bronya Facade is supplied in the following containers:
| Bronya Facade 5l | Bronya Facade 10l | Bronya Facade 20l |
Ultra-thin thermal insulation Bronya Facade NG
Modification Bronya Facade NG, identical in release form and container, with a low-flammability (basic) modification.
It is important to note! - we do not know, as of today, about similar non-flammable (NG) thermal insulation coatings and having a thermal conductivity of 0.001 identical to our basic modifications - complete competing analogues of these modifications from other manufacturers of residential goods. But on the market there are:
- Non-flammable coatings with an NG certificate, including from manufacturers of residential and commercial goods with some (or without) thermophysical effect, proposing to apply over their basic (G1) modification (by the way, without confirmation of thermal conductivity) for the purpose of supposedly obtaining a final thermal insulation coating with NG certification... Without comments
- ZhKTM material has NG certification, but has declared thermal physics 2-8 times (mostly without any legitimate evidence of thermal conductivity) higher than “one thousandth”.
Characteristics table of Bronya Facade
| Indicator name | Unit | Magnitude |
| Appearance of the coating | Smooth, homogeneous, matte white film | |
| Resistance of the coating to temperature changes from -40 °C to +60 °C | appearance of the coating | without changes |
| Durability for concrete and metal surfaces in cold-temperate climates (Moscow) | years | at least 15 |
| Thermal conductivity coefficient of the material | W/m °C | 0,0012 |
| Material vapor permeability coefficient | mg/m h Pa | 0,03 |
| Surface temperature when applying material | °C | from +7 to +120 |
| Operating temperature | °C | -60 to +120 |
| Density of the material at a temperature of 20°C, kg/m3 | kg/m3 | 600±10% |
| Mass fraction of volatile substances, no more | % | 43 |
| Hydrogen index of the material | pH | 7,5-11,0 |
| Drying time and film formation at temperature (20±2)°С, not less | h | 24 |
Coating adhesion by peel force, not less
| MPa | 1,3 2,2 |
Resistance of the coating to static influence at a temperature of (20±2)°C, not less than:
| appearance of the coating | no changes no changes |
Areas of application
Liquid insulation Bronya is highly effective in insulating various structures. It is used for processing roofs, floor coverings, facades, internal partitions and load-bearing walls, window slopes, steam pipelines, ventilation, hot and cold supply pipelines, cooling systems, all kinds of plastic, metal, glass containers.
It is recommended to use this heat insulator in temperature ranges from -60 °C to 260 °C. If installation and operation rules are followed, its service life is more than two decades.
Laying technology
The dimensions of most coatings and the non-standard, complex architectural component of modern buildings increasingly make it impossible to effectively use traditional thermal insulation materials both inside and outside. For example, not everyone can thoroughly insulate a curtain wall using mineral wool, especially if the home is located above the second floor.
With the advent of Bronya liquid thermal insulation, the situation has changed dramatically. The substance effectively fills any gaps in structures, creating a coating whose thickness is about 2-3 cm.
Surface preparation
To create a durable, and most importantly, reliable insulating coating, the liquid substance must be applied only after special procedures for preparing the coatings have been completed.
For these purposes, it is recommended to use solvents that have a degreasing effect on surfaces. Finally, it is enough to carefully treat the surfaces with a stiff wire brush.
Application of insulation
The ideal tools for high-quality, effective application of liquid thermal insulation are airless sprayers and soft brushes. During the application of the preliminary layer, no more than 1 mm of the substance is laid. The use of a step-by-step economical approach promotes optimal consumption of thermal insulation, eliminating the formation of layers.
Work can be carried out at surface temperatures ranging from -35 to 150 °C. The temperature regime in each specific case depends on the type and properties of the surfaces being treated, as well as the brand of insulating substance.
Immediately before applying the finished mixture, you should once again mix the insulating base in the container. If it is necessary to achieve a thinner consistency, a small amount of distilled water can be added.
Finishing
After the layer-by-layer application of the liquid insulator is completed and the substance has completely hardened, you can begin the final processing of the surfaces.
Once dry, Bronya thermal insulation resembles a coating in the form of acrylic paint. Therefore, not wanting to spend additional time on covering surfaces, the walls can be left in their current form.
If you have enough strength and opportunity for decoration, then a variety of finishing materials can be used to cover the frozen liquid insulation. As practice shows, a layer of plaster, ceramic tiles, and wallpaper are perfectly applied to such thermal insulation.
In any case, the service life of the Bronya liquid insulator, due to its strength and ductility, is decades. This, in turn, allows you to avoid finishing work for a long time.
CENTER FOR MODERN INSULATION TECHNOLOGIES
Liquid thermal insulation Bronya Facade - insulation of facades with one stroke of the brush!Liquid thermal insulation Bronya Facade is a specially developed ultra-thin ceramic thermal insulation material for facade work, which can be applied in layers of 1 mm thickness at a time! Everyone knows that insulating the facade of a house is a difficult task, but we have simplified the task as much as possible - thermal insulation of the facade is now comparable in labor intensity to simply painting the facade! Thermal insulation paint is a unique facade insulation technology for both private cottages and multi-storey residential buildings and industrial buildings.
Ultra-thin thermal insulation coating BRONYA Facade
It has the vapor permeability of high-quality façade paint and allows the walls to “breathe.” Liquid thermal insulation of facades does not change the architectural appearance of the building, unlike other facade insulation systems, which makes it possible to use liquid thermal insulation for insulating the facades of buildings of architectural monuments.
Ultra-thin heat insulator Bronya Facade
can be used for thermal insulation of concrete, brick, foam concrete and wooden walls.
Due to its high heat-reflecting qualities and reduced labor costs for application, compared to similar ultra-thin thermal insulators, Bronya Facade liquid thermal insulation
will be the ideal solution in the field of construction professional thermal insulation for you and your clients.
Ultra-thin thermal insulation Bronya Facade
- an ultra-thin liquid ceramic heat-insulating material that can be applied in layers with a thickness of 1 mm to 3 mm at a time (depending on application modes), and has the vapor permeability of high-quality façade paint (0.03 mg/m h Pa).
Liquid ceramic thermal insulation coating Bronya Facade
- a weather-resistant, highly viscous composition specially designed for thermal insulation of vertical surfaces. Thermal insulation coating applied to the wall from the inside or outside forms a single seamless surface, retains heat throughout the entire volume of the room, which has a positive effect on the microclimate.
Paint insulation
Armor Facade reflects up to 80% of the visible solar and infrared radiation spectrum. This leads to a significant reduction in heating of interior spaces in the summer, air conditioning costs, and in cold times it can reduce heat loss by up to 30%.
Thermal insulation coating Bronya Facade
– durable heat-insulating material, insulating paint, with high adhesion to any building materials.
Along with good vapor permeability, heat-insulating paint has hydrophobic (water-repellent) properties. Liquid ceramic heat insulator Bronya Facade
is used for thermal insulation of plastered, concrete, brick, wooden and other surfaces of building envelopes and structures during external and internal work. Ceramic heat insulator Bronya Facade can be coated on top with acrylic paint based on water dispersion; wallpapering is allowed. Tinting Bronya Facade is permissible only subject to strict adherence to our technical map, following our recommendations for the selection of tinting pastes and technical nuances.
Ultra-thin thermal insulation Bronya Facade allows you to:
§ carry out thermal insulation of walls both outside and inside;
§ maintain the volume of usable space (with thermal insulation of the walls from the inside);
§ do not increase the load on the building structure;
§ isolate facades with complex architectural solutions (including during reconstruction work);
§ increase the temperature comfort of the room;
§ reduce costs and time for construction work.
Ultra-thin thermal insulation Bronya Facade is supplied in the following containers:
| Bronya Facade 5l |
