Heating and cooking stove Termofor Fire-battery 11

Description of the oven

The Fire Battery stove is designed for air heating of room space. Just like its predecessors, it is based on the principle of convection. Convective pipes are built into the structure. They are located inside the oven and do not stand out from the general background. The room heating time is up to 15 minutes. The total operating time of the equipment, when fully loaded, ranges from 8 to 16 hours. This hourly run-up depends on the specified settings.

Each modification ends with a numerical value. Side convectors, similar in appearance to a radiator, have fins. The number in the name indicates their number. There are burners on top, the number of which can vary from one to two. You can both heat and cook food on them. If the model is basic, then the kit includes self-cleaning glass.

Modifications equipped with the index “B” include a heat exchanger. Its power is limited, designed for heating 5-8 square meters. m. area.

To meet the needs for hot water, a remote tank is located nearby, in which the water is heated. The system is designed so that boiling does not occur in the container. By connecting 2 radiators to the air-heating stove of the “B” series, you can heat the dressing room or washing room. Such devices are not designed to fully heat up the bath. The Light series is available as an economy option. It is distinguished by the absence of burners and glass inserts. As a result, a reduced price.

Oven TMF Fire-battery LIGHT

“Any whim for your money” is what they say nowadays. But if you are not a capricious blonde, you can save on those conveniences of a heating stove that you do not need. The construction and design were simplified as much as possible while still leaving a beautiful heating stove, equipped with a large sealed firebox and a high door; The stove, which is distinguished by excellent heating technology and fine combustion control, provides the ability to heat water and warm up food. The cast iron burners and rotary chimney outlet, glazing and convector on the door were removed. They still left replaceable protection for the firebox against burnout - let the Fire-battery stove last longer.

Thus, all technical characteristics of the Fire-battery Light model can be viewed in the table above. And here is another small table for comparing prices:

Furnace fuel

Fuel for the Fire Battery stove must have certain qualities. This is described in detail in the instructions:

• Firewood is the main type of fuel. The best varieties are acacia, beech, oak. Their humidity should correspond to 20-25%. Coal as a fuel is strictly prohibited.
• The size of the combustion chamber is designed for a firewood length of 30-35 cm. A small gap remains for closing the door.
• Wood fuels such as briquettes, wood chips or sawdust can be used as a substitute. Their humidity level must meet the required standards.

Operating modes

The main operating mode of the furnace is smoldering. However, it can burn like a potbelly stove. This need arises during ignition, when the device is starting up. Fire The battery should warm up well. To do this, until the draft stabilizes, all doors are opened, including the blower. As soon as the oven reaches its operating parameters, all doors are closed. The gate is moved to the closed position. The equipment is in smoldering mode.

This ensures rapid heating of the room, and then maintains the heating. This is very convenient for heating a country house.

Termofor Fire-battery 7

Alexey, 11/20/2017

Advantages: Appearance, ease of kindling, compactness, light weight, large firebox

Disadvantages: What I understood about this stove are rather its features: 1) It is very important to clean the chimney regularly (if you heat it constantly, then several times a season). For this, it is useful to exit through a tee and think about how you will climb onto the roof. If everything was fine with you before, but after some time the stove began to smoke, it’s time to clean the chimney 2) The stove may leak condensation. It is better not to use mono pipes (only for the first meter) - they are collected by smoke and, in addition to being supercooled, condensation will also flow through the cracks from the outside. To avoid problems, the pipes are only a sandwich and the outlet is through a tee, it doesn’t matter whether the pipe comes out through the wall or into the ceiling. The sandwich inside collects condensation and there will be no leaks and less cooling, and the tee will provide easy access for cleaning. 3) It’s better not to block the damper at all - regulate it only by inflow 4) When loading a new portion of firewood, you must first open the door a little and, after waiting for the draft to appear, open the door completely and load. 5) And most importantly, never overheat the oven! To do this, monitor the intensity of combustion. Do not operate for a long time with the blower open or with the fine tuning set as open as possible, in order to warm up the room faster. In short, monitor the flame through the glass and change the inflow settings. If you overheat, the seams will burn out or come apart.

Comment: I was looking for a stove with an outlet through the wall. It turned out to be the cheapest. Just 3 meters of pipe and the draft is like a beast, the stove is humming with the vent slightly open! In this mode, I only light at the beginning to get the first batch of coals and warm up the chimney. Then I close the vent and use only the fine-tuning knob - I open it as much as possible when I have loaded the firebox full and let the fresh wood burn for 5-10 minutes, then I close it halfway if I need it warmer, or I close it almost completely if the house is already warmed up and I need long-term burning. The stove does not smoke - a little smoke enters the room only when I load a new portion of firewood and it begins to burn strongly when the door is open. My gate is always open to the maximum. A 180 cubic meter house (6x7, two floors) fully warms up in 5 hours if it is -10 outside. Regarding the burner, it does not fit completely; if the room is dark, I can see the fire through a gap of less than 1 mm, but it never smokes. The handle doesn't get hot at all. I can always open the door with my bare hand. As for the glass, it smokes a little, but the fire is visible. How beautiful she is! All the same, I would give 10 points out of 5 for the design. And also, I took the OB7 because the small dimensions were important to me. If there is room, then take OB9, because Any length of firewood will fit there and in smoldering mode the power will be greater. And the difference in price is small.

Advantages and disadvantages

The advantages of the stove are as follows:

• The absence of welds makes it possible to use the stove in different places without fear of spoiling the appearance of the room.
• Thanks to slotted convective pipes, heat is distributed evenly in all directions. There is no heat, even near the stove. A shielding effect is observed when heat spreads in the form of infrared radiation.
• Increased efficiency, which remains 87%.
• Large fuel chamber space. Its special design allows the ash to fall into the container below. Unlike other stoves, there is no need to remove combustion products.
• The presence of 2 dampers allows you to regulate the combustion process. One controls the flow of oxygen, and the second controls the removal of smoke.
• Possibility of replacing the combustion chamber. As a rule, their service life is 7-8 years. Now it has at least doubled.
• In the Fire Battery heating stoves, the grates are made of cast iron. Thanks to this, all the fuel burns out completely.

Furnaces of this type also have disadvantages:

• Soot appearing on the glass during ignition. The reason is the increased humidity of the wood. Then it cleans itself under the influence of flame.
• If the pipe above the firebox is not 5 m high, then when melting, a small amount of smoke will enter the room. It comes out from under the burners.
• If the chimney is poorly insulated, its internal passage is reduced. This happens due to condensation, which, together with ash, accumulates inside the pipe.
• If a heat exchanger is installed in the stove, then during heating there must be water there.

Fire-battery 11B

Heating stove Termofor Fire-battery 11B is a perfect heating stove created using computer mathematical modeling and modern technologies. Wood heating stove Fire-battery 11B:

• quickly and economically heats any room with a volume of up to 250 m3;
• allows you to make a large load of fuel for long burning from 6 to 10 hours;
• made by robots, therefore reliable, durable and beautiful;
• heats water using a built-in heat exchanger tank;
• it is convenient to install and maintain;
• You can cook on it.

Fire-battery stove 11B is a stove for the home and not only.
Interior wood-burning air-heating stove Fire-battery is designed for economical air heating of residential and non-residential premises with temporary occupancy of people - for a country house, for a cottage, for a summer house, for an industrial premises - with a volume of up to 250 cubic meters. For reference, with a ceiling height of 2.5 m, the area should not exceed 100 square meters. m.

Long-burning stove Fire-battery 11B

The principle of operation of any stove: to burn wood, air is needed, and the movement of air is draft. When the stove is ignited, the access of air to the fuel is almost unlimited - the door is open, then the ash drawer is opened slightly and the damper on the chimney is fully open. To achieve a long burning mode, or smoldering mode, the air supply is practically blocked - there must be draft, but it must be minimal. To do this, the door and ash drawer of the furnace are tightly closed, and the draft is created by a fine adjustment valve and the extreme position of the gate.

• Door.
  The rotating mechanism of the handle reliably fixes the door in the closed position, and the seal ensures reliable pressing of the door to the oven body. The door has a size of 15-30 cm and opens to an angle of 120°, which allows you to conveniently load the stove with firewood to the very top.
• Ash box
  . Fire-battery stoves have a sealed ash box. When switching to an economical combustion mode, it slides into the ash pan and “snaps” onto the protrusion. The seal on the front wall of the ash drawer ensures that it is tightly closed.
• Fine adjustment valve.
  Located under the firebox door. A fine adjustment valve is necessary to supply air to the firebox during long-burning mode, when both the door and the ash drawer are tightly closed. The valve position adjustment is stepless and allows you to select any combustion mode - from intense to complete extinguishing of the stove.
• Shiber.
  Free rotation of the gate is prevented by the fixed positions of the handle. Even in a completely closed position, the chimney is not completely blocked by the damper; it remains possible to create minimal draft.

Wood-burning stove Fire-battery 11B - heating and cooking stove
Now, you don’t need electricity at all to keep warm, as well as to warm up or cook food. On the top surface of the Fire-Battery 11 stove there is a cast-iron burner with two rings of different diameters for cookware of different sizes. Air leaks and smoke escape through them are practically eliminated, since the opening is blocked by the own weight of the burners (they are cast iron, after all). Through this window you can add firewood to the firebox when loading it for long-term burning and clean the top of the stove from soot.

Stove Termofor Fire-battery 11B with water circuit

With the heating stove Fire-battery 11B it is not only warm and light without electricity, but also hot water without hot water. The heat exchanger built into the stove has a volume of 1.3 liters, but is capable of heating water in an attached remote tank with a volume of up to 100 liters. To do this, the remote tank and heat exchanger are connected by pipes; fittings for connecting the water heating system protrude on the rear wall of the furnace (external thread G3/4). The principle of operation of the heat exchanger tank is based on the physical properties of hot water to rise and cold water to fall. Thus, by creating the opportunity for water circulation in the heating system, the water in the remote tank gradually heats up, and you have the opportunity to wash or wash yourself with hot water.

Ease of installation and operation of heating stoves Fire-battery 11B

With a simple movement of the hand, the trousers turn into... no! The UP chimney outlet becomes a BACK smoke outlet.

• The large vertically oriented firebox door allows you to conveniently fill the stove with wood to the very top.
• A spacious firebox allows you to fill the stove with the maximum amount of firewood for long continuous burning.
• The door has a translucent screen made of heat-resistant glass "SCHOTT ROBAX". It doesn’t just give the stove a sophisticated look. Through this window it is convenient to control the combustion process. The glass is self-cleaning.
• The well-thought-out geometry of the firebox eliminates the accumulation of unburnt fuel, which gradually falls onto the grate under the influence of gravity.
• Replaceable protection protects the firebox from burning out in places where hot coals accumulate. If necessary, the protection can be easily changed to a new one at home.
• To remove ash from the ash drawer, you do not need to turn the drawer over, just tilt it like a dustpan. Easy and convenient!

Types of furnaces

Depending on the power, furnaces are divided into 4 types:

• Fire Battery 5.
• Fire Battery 7.
• Fire Battery 9.
• Fire Battery 11.
Read also:  Specific heat of combustion - formula, physical meaning and problem solving

The stoves have different levels of configuration, are divided into a standard version and an economy version, which is called Light and has differences:

• The economy version comes without burners.
• The chimney can only be straight.
• There is no glass installed in the door through which combustion control passes.
• Due to the absence of grates and ash pan, combustion products are removed manually.
• Lack of convectors.

Fire Battery 5

Oven Fire Battery 5 has the following technical characteristics.

Additional benefits:

• There is a cast iron burner on top. You can cook food on it, load firewood from above and clean the oven.
• The heat exchanger is made of stainless steel.
• Has efficiently working slot convectors.
• Large fuel space.
• Adjustment of the combustion process.
• The chimney outlet can go either up or down.
• All burnt fuel falls down.

Fire Battery 7

The Fire Battery 7 model has an enlarged combustion chamber.

Characteristics:

Advantages:

• 2 connection options, rear and front, depending on the room environment.
• The presence of an impenetrable glass partition.
• On top there is a cast iron burner made of 2 circles.
• Afterburning of gases. Present only in this modification.
• Cast iron grates.
• Availability of a sealed container for collecting ash.

Fire Battery 9

Fire Battery 9 stoves have the following features:

• There are 9 slot radiator fins on each side.
• Higher performance.
• For the “B” series, a stainless steel tank is included. It is possible to connect up to 2 batteries.

Other characteristics.

Fire Battery 11

The best representative of the Terfomor company. Of all the modifications, it has the largest fuel space. A small number of bookmarks are provided, even in the case of prolonged burning. It heats the room perfectly without occupying a large area. Human participation is minimized as digital technologies are used.

Technical characteristics of the furnace.

Fire-battery with water circuit

The presence of the letter “B” in the name of the modification of the Fire-Battery stove (for example, the Fire-Battery stove 9B) means the presence of a heat exchanger tank inside the firebox of the stove. It is designed to heat water for domestic needs. The heat exchanger itself has a small volume of 1.3 liters, but is capable of heating water in an attached remote tank with a volume of up to 100 liters. To do this, the remote tank and heat exchanger must be connected by pipes; fittings for connecting the water heating system protrude on the rear wall of the furnace (external thread G3/4). The principle of operation of the heat exchanger tank is based on the physical properties of hot water to rise and cold water to fall. Thus, by creating the opportunity for water circulation in the heating system, the water in the remote tank gradually heats up, and you have the opportunity to wash or wash yourself with hot water.

The article “All about heat exchangers” talks in detail about the nuances, dimensions and precautions when installing a water heating system using a heat exchanger built into the furnace.

Ease of installation and operation of heating stoves TMF Fire-battery

Cooking and heating water using a heating stove is, of course, good, you say. “But first you need to install it, then heat it every day, and also clean it periodically. We did everything to make it easy and convenient!

• The universal chimney outlet allows the chimney to be led both upward and backward. Note! Fire-battery Light stoves (see below) have only one option for the chimney outlet - up.

• The large vertically oriented firebox door allows you to conveniently fill the stove with wood to the very top.
• A spacious firebox allows you to fill the stove with the maximum amount of firewood for long continuous burning.
• The door has a translucent screen made of heat-resistant glass "SCHOTT ROBAX". It doesn’t just give the stove a sophisticated look. Through this window it is convenient to control the combustion process. The glass is self-cleaning.
• The well-thought-out geometry of the firebox eliminates the accumulation of unburnt fuel, which gradually falls onto the grate under the influence of gravity.
• Replaceable protection protects the firebox from burning out in places where hot coals accumulate. If necessary, the protection can be easily changed to a new one at home.
• To remove ash from the ash drawer, you do not need to turn the drawer over, just tilt it like a dustpan. Easy and convenient!

Heating stove TMF Fire-battery Characteristics and dimensions

A table is the best way to organize data. Ask Mendeleev, he will confirm. Therefore, we have collected for you in one table all the characteristics of Fire-battery stoves, see:

Installation features

When installing the Fire Battery stove, it is necessary to take into account the nature of combustion. Despite the presence of convection channels, which act as a screen, the oven becomes very hot. This may pose a risk of fire.

The oven is an air atomizer. The process is based on natural air convection and this must be taken into account when installing equipment. The operating instructions describe in detail the installation process of Fire Battery heating stoves of various modifications.

The best option for placing the stove is the middle of the room. Convective flows should not have obstacles in their path. However, installing equipment this way is not always convenient. Therefore, the stove is usually installed near the middle of the wall. All furniture nearby is removed so as not to impede the flow of air.

The equipment will only heat the room in which it is installed. If it is Fire Battery 7B, 9B or 11B, then connecting up to 2 radiators is allowed. Then it is possible to heat the adjacent room.

Fire-battery stove = Fire-battery stove

Heating stove Fire-battery is also a stove for cooking. Even if the electricity is turned off, the TMF Fire-battery stove will warm you, feed you and give you something to drink. On the top surface of the firebox there is a cast iron burner with two rings of different diameters for cookware of different sizes. Through this window you can add firewood to the firebox and clean the upper part of the stove from soot.

Fire-battery Light models do not have cast iron burners. The upper surface of Fire-Battery Light stoves can only be used for heating food (read about Fire-Battery Light stoves below).

Choosing a chimney

Incorrect installation of the chimney leads to major operational errors.

The rules are as follows:

• It is important to choose the right material. Possible steel or ceramic. If the smoke is difficult to remove, blockage will occur quickly.
• The chimney is well insulated. The air temperature when leaving the furnace reaches 450-500 degrees, from the flame of flammable substances. If thermal insulation is not installed, the risk of the roof catching fire is high.
• The height of the chimney should be 5 m.

Installation safety

Due to the high heating of the walls, the following requirements must be adhered to:

• If the floors are wooden, then brickwork is made on top, 10 cm thick. Such a layer is considered reliable protection against fire.
• For concrete floors, ceramic tiles are laid on top.
• The ceiling part is made in the form of a box. Mineral or basalt insulation is laid inside.
• The distance between the Fire Battery and the walls should be 120 cm. Then insulation and metal sheets are laid outside the stove. After this, the interval with the wall is 60 cm.

The Fire Battery Stove is not very difficult to operate. It is important to study the instructions and follow them. Pay special attention to ignition, during which all doors must be open until combustion reaches its operating mode. It is necessary to constantly monitor the chimney and prevent it from clogging.

Installation of heating stove TMF Fire-battery 9 (SNT Aleshinsky Gardens)

Our specialists completed the installation and assembly of the heating stove “Fire-battery 9”

production The heating stove was installed in a wooden country house.

The installation of the heating stove “Fire-battery 9” was carried out on a turnkey basis: all materials (heating stove “Fire-battery 9”, stove support, elements of the Ferrum chimney system, thermal protection elements and the necessary components) were delivered to the site by our company in day of work.

Completed work:

1. Preparing the base for the heating stove. Furnace support 20 (floor screen 20) was used as the base.

production The protective screen is designed to protect structures made of combustible materials from fire. Made from high-quality structural steel grade 08ps with a thickness of 0.8 mm. Assembled from box-shaped elements, hollow inside, with ventilation holes for air circulation and cooling of the screen walls. Painted with heat-resistant silicone enamel, which retains its properties at temperatures up to 600 °C. Floor screen dimensions (L×W×H): 805×560×103 mm.

2. Thermal insulation of walls. The location of the heating stove is wall-corner. Thermal insulation of the walls was carried out using fire-resistant fiber cement boards “Flamma”: sizes 1200×1220×9 mm and 1200×800×9 mm, ceramic bushings and foil-coated basalt cardboard.

3. Installation of the chimney system. The chimney outlet is through the wall, then along the wall of the house. The total height of the chimney is 6 meters. The elements of the chimney system are made of 0.8 mm stainless steel: single-walled and insulated sandwich (120/200 mm) manufactured chimney

.

The starting pipe is a single-wall pipe made of stainless steel 0.8 mm, 0.5 m long. The passage unit through the wall has been installed and thermally insulated (using Minerit fiber cement board, basalt wool and basalt cardboard).

Outside the house wall, to create a support for the chimney, a K-6 (700 mm) console with an installation platform is installed to distribute the vertical load on the supporting structure. A sandwich tee with a removable inspection plug is installed for the possibility of servicing the chimney. The vertical section of the chimney is fixed to the wall using wall fasteners (wall clamp with a diameter of 200 mm + a rod 750 mm long).

4. Connecting the heating stove to the chimney system. The chimney connection is top.

Control firing
was carried out . Recommendations were given to the Customer for the further use and operation of the heating device and chimney.

Wood heating stove " Fire-battery 9" from

— designed for heating rooms with a volume of up to 200 m3. The elegant and stylish appearance of the stove allows it to be installed in any modern room. A spacious firebox allows you to fill the stove with the maximum amount of firewood for long continuous burning. Replaceable burnout protection protects the lower part of the stove firebox in the area where hot coals accumulate. A sealed ash pan with a lock prevents uncontrolled air leaks into the grate. Fine adjustment of the combustion intensity allows you to steplessly select any combustion mode - from intense to complete extinguishing of the stove.

Place of work:

Moscow region, Bogorodsky urban district, SNT Aleshinsky Gardens

Completed work:

installation of a heating furnace on a turnkey basis.

Turnkey installation cost: RUB 80,000.

• Cost of work: 20,000 rubles.
• Cost of materials: 60,000 rubles.