Which garage heater is better: a review of 4 options

Which heater is the most energy efficient?

Before the start of the heating season, it is worth considering in advance which equipment will be optimal for your home.
There are several types of heaters:

• Electric (convector).
• Infrared.
• Micathermic.
• Air conditioner.
• Ceramic plate (panel).

Electric heater in the interior

Electric convector

Its operating principle is similar to that of an oil cooler. Air circulates through the heating element. The heated air rises and, after cooling, falls to reheat.

The most popular are Atlantic models. The power of convectors varies from 0.5 to 2.5 kW. To heat a room of 20 sq. m. it will take 4-5 hours.

Electric convector Atlantic

Infrared heater

Oil and electrical products have been replaced by a new type of heating equipment. The energy consumption of such equipment is significantly less. A quartz emitter is a heating element that heats up and transfers heat to nearby objects. Such equipment does not heat the air. It is suitable for quickly heating a room. But it is not able to efficiently heat the entire house for a long time.

The infrared device can be installed outdoors. The equipment can be mounted to the ceiling or installed on legs. For heating a room up to 20 square meters. m. it will take 2 hours.

Popular models: Eko, Saturn, Beko, etc. The product consumes an average of 90 W per sq.m.

Micathermic heater

This product is distinguished by its economy and efficiency. It was developed using new technology and was released not so long ago. The equipment was previously used in astronautics and medical institutions. The equipment can be installed on the ceiling or wall.

A micathermic heater heats up efficiently because it has several plates that are coated with mica. It is safe as it does not get hot. Objects around the device heat up evenly.

There is one drawback in the equipment - high cost. A high-quality model is a product from Polaris with a power of 1.8 kW.

Micathermic heater Polaris

Air conditioner

The air conditioner is distinguished by its efficiency. Often used to heat a country house. The equipment consists of an indoor and outdoor unit. Heating a room is different from other heating devices.

The air conditioner is powered by a heat pump. It takes warm air inside the room using a heat exchanger. Therefore, even at negative temperatures, the air heats up and enters the house already warm. Freon is used for heating. Under the influence of pressure, the gas passes through the indoor unit in the heat exchanger and heats up to 80 degrees. After this, the freon goes to the outside and returns to the gas under low pressure. After boiling, it flows again into the indoor unit.

From 2 to 5 kW of electricity is consumed per hour, depending on the model. Air conditioners can heat houses even with a large area. Popular models: Samsung, Daikin and LG.

Ceramic panel

Such equipment is also considered economical. The device looks like a ceramic plate. It works on the principle of long-wave infrared radiation. Excellent for different interiors, as it has a steel heat-conducting box. The panel can be installed on a wall or ceiling.

To calculate electricity consumption, it is necessary to take into account the dimensions of the device. On average, the panel consumes 0.2-2.5 kW per hour. Room 20 sq. m. can fully heat up after 2 hours.

The Best Gas Heaters for a Garage

Heaters can be connected to cylinders or a gas pipe. This is practical for garages where there is no electricity. Such devices also stand out for their increased power, designed for an area of ​​20-60 m².

Ballu BIGH-55

Rating: 4.9

In first place in the category is a product from Ballu. The BIGH-55 heater has a vertical design on wheels in a closed casing. The front panel has an outlet for a ceramic heating element, covered with a stainless steel grille. The heater can operate both from a rear-mounted cylinder and from a gas pipe. There are two handles on the sides if you need to lift the device to move it over a threshold or steps. Owners in the reviews like the fact that when the heater falls, the gas supply is turned off automatically, protecting the garage from fire. During an hour of operation, the heater burns only 300 g of gas.

Experts considered the heater to be the best for large multi-car garages with an area of ​​60 m². If the unit is placed in the middle, the entire building will be warm. Mechanical control with a thermostat allows you to set up automatic operation with power adjustment from 1.5 to 4.2 kW.

Advantages

• comfortable ignition with a button;
• aesthetic appearance;
• protective systems are triggered in the event of a capsize or gas leak;
• does not depend on power supply.

Flaws

• large dimensions 36x42x72 cm;
• weight without cylinder 8.4 kg;
• When installing the cylinder, you need to be careful not to tear off the sensor tubes.

Timberk TGH 4200 SM1

Rating: 4.8

The gas heater from Timberk has dimensions of 30x38x55 cm and moves on four wheels. The front panel provides an outlet for a ceramic heating element protected by a steel grille. The controls are located at the top. You can heat the garage in one of three modes with a power of 1.4-4.2 kW. During an hour of operation, the heater burns 310 g of gas, so a 27 liter cylinder is enough for 80 hours of continuous operation. If necessary, the unit can be lifted by the handles and moved. The cylinder will not fall out, since it is secured with a steel clip. Reviews like the heater because it is easy to start - to turn it on, you need to turn the valve on the cylinder and press the piezo ignition button.

This gas heater is distinguished by the presence of a reducer included in the kit. To heat your garage, all you have to do is purchase and fill a gas cylinder.

Advantages

• wheels for rearranging;
• economical consumption 310 g/h;
• rollover shutdown;
• suitable for commercial use when heating a garage;
• control of gas leakage and CO2 output.

Flaws

• high price;
• weight 6.3 kg;
• There is a slight smell of gas when turned on.

TOURIST MINI AFRICA

Rating: 4.7

The compact model from Tourist completes the category of gas heaters for garages. Its name “Mini Africa” is completely true - a few minutes after switching on, a room with an area of ​​12 m² will be warm. The unit operates from a portable 220 ml canister installed in the rear of the case. There are no hoses outside that you can get caught on, which is what customers like in the reviews. Mechanical control of the combustion power is provided with a maximum heat release rate of 1.2 kW. The heating element is started by pressing the piezo ignition toggle switch. Plastic feet do not slip on iron or tiles, and also prevent heat transfer to floor materials.

Experts noted this heater as the most compact and economical in the category. Its dimensions are only 13x13x26 cm, so it can be easily placed even inside a car when working with electricians. During an hour of operation, the heater burns 100 g of gas. The manufacturer claims that if you set the economy mode, then from a 220 g can, the device will work continuously for 5-6 hours.

Advantages

• durable ceramic emitter;
• anti-slip feet;
• several heating modes;
• weighs 1.5 kg.

Flaws

• part of the body made of plastic;
• there is a slight smell of gas;
• the steel handle cuts into the skin.

How to calculate the efficiency of heaters

The most economical equipment includes infrared designs. Their power is comparable to traditional water heating, but energy costs are lower. At the same time, the room is quickly heated, which also contributes to savings.

Convectors cannot be classified as the most economical products, but when using thermostats, these indicators improve noticeably. When using them, minimal heat losses are recorded, since there is no need to heat the water.

The table shows the standard calculation of electric heaters

Using energy-efficient heaters, you can create efficient heating systems. To reduce energy consumption by heaters, the following measures are taken:

• the structure is covered with a second layer of brick with thermal insulation;
• windows and doors are replaced with more insulated models;
• the attic is insulated;
• Accurate thermostats are installed.

If heat losses are reduced, the use of electrical equipment will become more economical.

Infrared heaters for home and garden

Infrared heating devices, which recently appeared on the market, are very quickly gaining popularity. They do not have most of the disadvantages characteristic of other models of electric heaters. These economical devices, just like other heaters, can be of several types - wall-mounted, floor-mounted, ceiling-mounted.

In addition to such valuable quality of infrared heaters as heating objects, furniture and walls, rather than air, they also have the following:

• the ability to quickly warm up the room;
• Fire safety;
• during their operation, the air in the room does not dry out;
• noiselessness;
• devices can be mounted on any plane - walls, floors, ceilings;
• low power consumption.

Infrared heating devices can be with ceramic panels or micathermic, and are the most economical heaters for the home. The effectiveness of micathermic devices is associated with the presence of non-metallic plates coated with mica. These devices easily heat objects located at a considerable distance from them, and remain cold, which characterizes them as quite safe. The price of these heaters is much higher than other types. But it is justified by their compactness, installation capabilities in various places, and ease of rearrangement.

Modern ceramic heating devices operate very efficiently. Many buyers recognize them as the best heaters for the home.

Due to the high heat transfer of ceramic heaters, they do not consume much electricity and operate as follows:

• based on convection, when flows of cold air pass through the heating element and move further, thereby increasing the air temperature in the room;
• using infrared radiation, which heats not only all objects in the room, but also the room itself.

The most relevant, economically, is the ceramic panel. Externally, the heater resembles a stove. The heating panel is hidden in a steel box, which has energy-saving and heat-conducting properties.

Many manufacturers have begun producing heating devices with combined infrared-convective heating of the room. Due to the synergistic effect of double heating, such devices can easily and quickly create comfortable conditions for a person not only in a city apartment, living rooms of a country house or country house, but also in utility rooms not intended for living.

Choosing an electric heater for the garage: 3 best models

Does your garage have an outlet? In this case, it may be more convenient for you to use electric models for heating. They can no longer be called portable, but they are considered safer. They are beneficial to use if you are not bothered by the fact that electricity will cost you more money than usual - or for temporary use in the “turn it on for a few hours, turn it off” mode. This top includes both a heater for a small garage and 2 models for larger spaces - domestic and commercial appliances.

Portable heater Handy Heater

Plug this device directly into a wall outlet and you'll instantly notice how the air in your room becomes warm and comfortable. The portable heater takes up very little space, but has enormous power (400 W). Want to warm up your garage or workshop? All you have to do is plug it into a power outlet, adjust the thermostat, and within a few minutes there will be no trace of the cold left. Suitable for heating various rooms up to 30 square meters. m.

Many will say that more power requires a lot of energy. But the manufacturer and users who have already tested this model report the opposite trend. The portable Handy Heater consumes no more energy than your home laptop. And regarding noise, this device has some pluses. In order to hear the noise from its work, you need to concentrate very hard. The heater body is made of high-quality plastic, and inside there is a completely safe heating element.

Review from a real buyer As for me, this is a rather controversial purchase. In advertising, everyone says that this is a silent heater, but as it turns out in practice, it makes noise, and this creates some discomfort.

Price: ₽ 1390

Infrared heater BALLU BIH-LM-1.5

This versatile heater with a rated power of 1.5 kW is suitable for local heating of workspaces in utility rooms, garages, workshops or warehouses. The presence of a comfortable handle and the relatively light weight of the device allow you to install it in any convenient place. For floor placement of the device, manufacturers suggest using special removable supports, which are included in the kit. Many users mount this heater on the wall using a special bracket and, by adjusting the angle, direct the heat to the desired location.

Having tested the device, the first thing I would like to note is the competent distribution of heat flows. The air moves not from bottom to top, but from top to bottom. In addition, the heater does not “burn out” oxygen and does not dry out the air in the room. The body of this unit is made of durable steel, treated with a special anti-corrosion coating on top and reliably protected from moisture.

Price: ₽ 1,990

Which heaters are better for home and apartment

The choice usually comes down to four main options:

1. Oil.
2. Convector.
3. Infrared.
4. Fan heater.

Convectors and fan heaters

They quickly heat the air, mix the flows, uniformly warming the room. They are safe and durable, the body is not hot, can be attached to the wall and placed on the floor, compact and lightweight.

Fan heaters make a particularly loud noise, but they are the smallest and are easy to carry and move from place to place.

However, some may not like the constant noise of the fan and strong air movement. In addition, in order for the room to be warm, the device must be constantly running. It does not accumulate heat in the body and when turned off, heat transfer immediately stops.

Fan heater

If a person with allergies and pulmonary diseases lives in the house, it is better not to buy a fan heater. But for a children's room, a convector is preferable because it is the safest device.

Infrared heater

“House sun,” as it is sometimes called, instantly heats people and objects located in the area of ​​infrared rays. However, this effect is local, therefore, as a device for heating the entire room, IKO is not very suitable.

In addition, users note that after sleeping in a room where the IR heater was turned on all night, headaches and lethargy appear.

Many owners have found the most successful use by placing the heater near the table to keep warm while working, above the bed (turn it on briefly before bed to warm the bed), in the kitchen, etc.

Infrared heater

Oil radiators

They remain in demand among those for whom air movement around the apartment is a decisive undesirable factor.

They are heavy, cannot be repaired, have a certain shelf life, after which, and if used incorrectly, there is a risk of explosion (it is important that the thermal relay is in good working order, since most accidents occur precisely due to overheating)

But if all norms and rules are observed, it will be able to provide heat instead of a battery. The device takes a long time to heat up, but also takes a long time to cool down. Doesn't generate dust, works silently.

The oil heater body heats up to dangerous temperatures. In addition, it cannot be dropped. Therefore, it is better not to put it in the children's room.

Oil type heater

Fan heater - a simple and cheap option ↑

The design of the device is very simple, which ensures its reliability

When heating a garage with electricity, a fan heater is most often chosen. This is due to its mobility (the ability to install anywhere) and low cost. The equipment operates according to the following principle. The spiral or heating elements, which act as a heat exchanger, are heated by electricity. The fan draws air from the room and circulates it between heated elements. The air is heated by heating elements and enters the garage. Typically, a fan heater has two heating stages, which are characterized by power: 1 and 2 kW. The advantages of a fan heater as a method of heating a garage with electricity include:

A large selection of modifications allows you to choose the best option

Cost-effective: low cost of the device.

• Compact, mobile. The device has small dimensions and light weight. You can bring it to the garage with you, rearrange it to any place and turn it on in the desired part of the room.
• Quickly heats up the room. Due to the air forced by the fan, heating occurs faster than, for example, a convector.
• Ease of use.
• If necessary, you can change the heating intensity using the speed switch.
• Automatic operation is achieved by turning off automatically when a certain heating level is reached and turning on when cooling.

This is rightfully the most economical way to heat a garage with electricity, but it has a fan heater and disadvantages that are quite significant:

1. Dries the air. It is not recommended to use for a long time.
2. Due to dust particles getting on the heating elements and burning them, it emits an unpleasant odor.
3. Heats the room unevenly. The temperature will be higher near the device.
4. Produces noise during operation.

Popular brands : Scarlett, Timberk, Polaris. Price : from 1.5 thousand rubles

Gas

In terms of the cost of energy (natural gas), this is the highest in the garage, but it is accompanied by hidden costs:

• preparation of design and permitting documentation;
• payment for the work of licensed gas equipment installation specialists;
• costs for ventilation and removal of combustion products;
• costs for routine maintenance of the boiler;
• possibly the necessary construction and subsequent maintenance of the chimney.

Alternatively, to heat the garage you can use infrared gas heaters, heating panels, convectors that consume liquefied propane and butane in cylinders - this eliminates the need to go through the authorities, but adds the problem of providing fuel.

Features of gas heating:

• advantages - high level of automation of the heating system, when using natural gas - constant availability of energy in the main line, cost-effectiveness and high efficiency of gas equipment;
• disadvantages - the presence of a danger factor of explosion, fire or carbon monoxide poisoning.

When using gas heating, the building owner must especially strictly observe safety requirements in his garage.

A good option for a garage is an automatic steam-drip condensing unit, which is up to 15% more economical than other models, as it can operate efficiently at low gas pressure. In the heat exchanger of such a boiler, water from heating with a gas burner turns into steam, and then condenses again into a liquid state, which is accompanied by the release of heat. Such boilers are produced in floor-mounted and wall-mounted versions. For a garage, the second option is preferable, eliminating the possibility of tipping over when performing some work.

Additional actions

Technology is no smarter than humans. No device can replace your ingenuity and will not take responsibility for your comfort and health. Therefore, in order for the heater to operate correctly while maintaining efficiency, and for greater savings, it is worth taking some actions.

• Insulate the walls. Drywall + foam works best.
• Install plastic windows. Tightness is the basis for heat preservation. Through old wooden frames, 50% of the heated air will be blown out.
• Hang interior doors if you use a convector. This heater has one of the highest efficiency in confined spaces - so use it to its full potential.
• Combine convectors into a single heating system. This way you can control the heating and save electricity.
• Buy a device with an electronic thermostat. It is reliable, durable, silent. The error in temperature readings is no more than 0.1 degrees. This helps maintain optimal heat with minimal energy consumption.

Types of electric heaters

Electric heaters can use different methods of heat transfer in their operation. Based on this feature, there are several types:

• Convective. This category combines electric convectors, fan heaters, air heaters.
• Radiating. This can include heat-emitting mirrors and IR panels.
• Convective-radiative, combined models. This group includes the most common type - oil radiators.

In order to make the right choice and find the most economical heat source for your home, you need to compare the technical parameters of all categories.

Convective

Electric convectors
The operation of such models is based on the phenomenon of convection. The work looks like this. The fan draws in cold air and passes it through a heating element system. The heated air goes out, rising to the top. The constant movement of air flows in the room ensures uniform heating of the room.

Regardless of the specific type and model, the convector is able to quickly warm up the room. It is indispensable in country houses, where the owners appear from time to time, and the installation of a complex heating network is simply impractical. Convectors are economical devices, but it is still not always advisable to install them as a constant source of heat. The simplest cheap models remain a fire hazard. Convectors with complex emergency shutdown, protection, and safety systems belong to more expensive price categories. Power consumption is quite high. The main disadvantage is the burning of oxygen by heating elements.

Infrared

Such heaters are modern, technically sophisticated devices. They have a more complex operating principle than convectors. The main difference is the use of infrared radiation. Such heat penetrates deeply into surrounding objects, and from them the air is heated. In fact, the operation of infrared heaters can be compared to the sun's rays. Not a single one, even the most modern and advanced convector, can compare with them in efficiency.

IR panel heater

It is impossible not to note the positive effect of infrared rays on humans. Even in a cold room a person will feel warm. If the convector warms the room mainly in the upper part, then the IR heater will provide uniform heating in the full sense of the word.

IR models are almost completely free of the disadvantages that convectors have.

The only and main drawback is significant power consumption. IR devices can hardly be called economical, but electric heaters of this type have the ability to program different operating modes, allowing the device to automatically turn off if additional heating is not necessary. These features help reduce energy consumption.

Combined

Combination models are the cheapest, so they are the most popular on the market. They are absolutely not suitable as the main source of heat. It is worth choosing a combination heater if you plan to use it for a short period of time to slightly raise the air temperature.

In terms of the method of heat transfer, they resemble a convector. The oil poured into the radiator heats up to a predetermined temperature, and the metal surface of the heater begins to release the resulting heat. Just like convectors, combined models can have a built-in fan and turbocharging function. Such elements allow you to increase the rate of heating of the room, bringing the parameter at least a little closer to the performance of infrared devices. Among the shortcomings, one cannot fail to note the significant dimensions, massiveness, and heavy weight.

Types of energy-saving heaters

Modern heaters are easy and safe to use. Not all types and models of heating devices are suitable for a garage. It is best to choose an electrical product to insulate a small room. It is economical and has a low fire hazard.

Infrared heater

Among the list of good varieties of products is an infrared heater. It is attached to the wall, closer to the ceiling. The long waves of the device, hitting the surface of objects, heat their surface and increase the temperature. Objects begin to emit heat, warming the room.

The main advantage of an infrared heater is the space saving, as well as the ability to direct waves to the entire surface of the car. The disadvantage is that the heater is not suitable for quickly heating a room, it only maintains heat.

Emitters in infrared devices can be metal, ceramic, micathermic, quartz, halogen or carbon.

Inverter heater

The main working part of an inverter heater is a heat pump, which consists of an external and internal compartment. The inner container contains a heat exchanger in which freon is located under pressure. When heated, freon passes into the external compartment, where it is converted into a gaseous state. This process is accompanied by the release of thermal energy.

There are gas and electric types of operation of the heating device. For a garage, it is better to choose a heater that runs on electricity. The advantages include:

• quickly warms the air in the garage;
• after heating the air, the power of the device is automatically reduced;
• energy saving;
• the product is environmentally friendly and does not emit harmful impurities;
• works quietly.

Attention! It is important to ensure that there are no sudden changes in voltage in the network, otherwise the device will quickly break down.

Ceramic panel

Heating plates are made from natural ceramics. Between the body of the device and the ceramic tile there is a main part - a heat-resistant cable. The device operates as infrared and convection heating.

Advantages of the device:

• fast and uniform heat distribution;
• all objects that are hit by infrared waves heat up, and additional heat comes from them;
• high degree of protection from adverse factors, such as high humidity;
• energy saving;
• silent operation of the device.

To increase the efficiency of the heater, you must follow the installation and operation instructions.

Oily

An oil radiator powered by electricity is considered traditional. Inside the container there is mineral oil and a heating element is installed. After turning on the heater, the heating element heats the oil, and it, in turn, transfers heat to the body. As a result, heat emanates from the body and the room heats up.

The advantages of the radiator include the following characteristics:

• no skills required for installation;
• long service life;
• does not dry out the air;
• heats a large area of ​​the room;
• The case is shockproof.

Different types of oil radiators have additional functions. For a garage, it is best to choose a heater with the following functions:

• rheostat, with which it is possible to regulate the temperature;
• automatic overheat protection system;
• sensor for switching off the device when tilted or tipped over;
• timer to turn on the device at a certain time.

Before the device begins to emit heat, it needs to warm up well. Another disadvantage is uneven heating of the room.

Fan heater

Inside the device there is most often a blade fan, which, when turned on, heats the cold air. There are three types of fan heaters, which have different heating elements. The heating element is a heating element, a ceramic plate or a nichrome spiral. It is better to choose a heat gun for the garage.

The advantages of fan heaters are:

• low cost;
• the device heats the room and maintains the air temperature;
• uniform heat distribution;
• energy saving.

The best choice for a garage would be a fan heater with a built-in filter, which is located on the rear housing. It will not allow the device to become clogged with dust and dirt, which will be abundant in the garage during any work. The filter is not difficult to clean; replacement cartridges are available for sale.

Convector

Convectors are gas, oil and electric. For a garage, it is best to choose a gas heater that is equipped with a closed combustion compartment. This type of heater does not dry out the air.

The operation of convective devices is based on the fact that cold air enters through the lower openings of the structure and is heated. The air becomes lighter, so it exits through the upper openings and warms the surrounding area.

The advantages of the device include:

• the housing does not heat up, so there is no risk of burns;
• high fire safety;
• The parts are durable, so the service life is long.

It is recommended to place the convector on the wall so that there is free access of air to the holes. The holes located in the upper part of the device are closed with adjustable flaps. Accordingly, a person can direct flows of warm air in any direction.

Important! If a convector is installed in the room, then you should definitely take care of the hood. An exhaust hood is necessary to supply fresh air and remove combustion products.

Electric fireplace

The main source of operation of an electric fireplace is electricity. The device operates on the principle of a fan heater. The main characteristics of the device include:

• unusual design;
• installed in one place indoors without the possibility of movement;
• energy saving;
• uniform heat distribution.

The product is suitable for large garage spaces as it takes up space. In case of large-scale work it will interfere.

Gas and diesel heating devices

Gas and diesel heat appliances are used when you need to warm a room quickly. It is better to purchase a product that runs on liquid fuel, such as diesel, diesel or kerosene. The operation of the system of these heating devices occurs due to the combustion of fuel or gas when the device is connected to the electrical network.

There are two types of heater operation. The first type of heaters has one common compartment, so particles of combustion products penetrate into the room along with the heated air. For devices that belong to the second type, the chambers are fenced off and combustion products are filtered.

Owners of a gas or diesel gun should be careful about safety precautions. It is important to regularly ventilate the garage space and protect it from fire.

For apartments, cottages, garages

Electrical appliances are used to heat rooms for a variety of purposes. A suitable model can be selected for a country house, city apartment, small cottage, garage, workshop. All that is required for this is to correctly assess the compliance of the technical parameters, advantages and disadvantages of each type with the assigned tasks.

To the apartment

Convector BALLU BEC/M in an apartment
For a city apartment, you can choose an electric heater of any category. The peculiarity of such premises is their connection to central heating networks, so constant operation of the device is a rare occurrence. As a rule, the heater is turned on either to quickly raise the temperature, or in the event of a failure in the central communications.

The most common choice of consumers is convectors. They can be used for a long time and have moderate power consumption. Fan heaters are not the best choice. In addition to the fact that such models make a lot of noise during operation, they have the greatest “gluttony” in terms of electricity consumption.

If failures in the operation of heating networks are a frequent occurrence, it is better to choose not a convector, but an IR heater. Despite the high power consumption, infrared heaters are more economically feasible. They have the ability to fine-tune and set different operating modes. As a result, maintaining the optimal temperature does not require constant operation of the equipment at full power, which means that electricity consumption is reduced. Convectors can also have similar functions. As a result, when choosing an infrared heater or convector, you can ensure the main requirement - the economic feasibility and energy efficiency of additional heating.

To a country house

Electric heater
The choice of a heater for a country house, first of all, depends on the frequency of its operation. A house outside the city is not always used for permanent residence. Most often, owners come only during the warm season. Houses suitable for year-round living are immediately connected to village or autonomous heating systems. Choosing a heater for such a house is no different from choosing a heater for a city apartment.

A completely different approach is needed if the heater will be used for a seasonal dacha. The heating device must meet two requirements - the ability to quickly warm up the room and the ability to maintain a comfortable temperature for a long time.

The task of quick heating is best handled by convectors (fan heaters) or IR models. On the other hand, installing a complex appliance for the home, which is almost always empty during the cold season, is impractical. The simplest and cheapest heat gun is the best option, especially if there are other heat sources in the house, for example, a brick oven. If heating is not provided at all in the dacha, a combined model is suitable.

For non-residential premises

I want to provide heat not only for a house or apartment, but also for non-residential premises where the owner spends a lot of time. The most striking example of such premises are garages and home workshops. Buildings of this type do not require temperature maintenance for a long time. The main task facing the heater is to quickly warm up the air. The best choice is convectors.

Heat gun Siberian Federal District

The cheapest option is fan heaters and heat guns. They differ, in fact, only in power indicators. After switching on, they provide almost instant heating of the room. Such a convector has considerable power consumption, but it is almost never used in non-stop mode, so heating costs are not high.

You should not choose complex models, infrared heaters. They are expensive. Their purpose is to create and maintain a microclimate. Operation for the short period required to heat the room will not allow the use of different modes, so heating costs will be enormous. This rule is met not only by IR heaters, but also by modern convectors.

Oil coolers work well. Just like a convector, they can quickly heat a room. The heater will successfully maintain the temperature for a short period. The oil does not cool down for a long time, so heat transfer will be ensured even after the heater is unplugged.

Use of liquefied gas

Equipment of this type is practically no different from the previous version, but its operation is associated with increased safety measures, since normal operation of the installation requires a connection to a propane cylinder, and during operation of the heating device, oxygen quickly burns out and combustion products enter the room. To this list it is worth adding strong noise and a powerful fan that can raise dust into the air in the room.

Therefore, heat guns running on liquefied gas are not recommended for use in rooms where people are constantly present or working.

Which heater is better to choose for your home: comparative analysis

Reviews will help you choose the appropriate option. Many buyers of this type of structure can advise which heaters are best for a summer cottage. When choosing a suitable product, it is important to choose the right power. This indicator depends on the cubic capacity of the room. It is better to purchase models with additional functions. This could be a power regulator, a built-in air humidifier, and the ability to automatically turn off if the device falls.

Ceiling heaters fit perfectly into a country house interior

Table 2. Prices for some models of different types of heaters

Polaris PMH 2095

A heater in the form of a fireplace is considered a stylish solution.

When choosing a specific type of heater and model, remember that its main purpose is to make your stay and life more comfortable and cozy. The favorable microclimate in the room and the heat created depend on the right choice.

How much energy does an infrared heater consume?

On average, such a heater consumes 0.5 kW per hour. This indicator indicates a high efficiency compared to other heating devices. If it works for about 10 hours a day, then it will consume 150 kWh per month. This electricity consumption can be considered a good indicator.

When purchasing a heater, you need to pay attention to the electricity consumption and power of the device. When choosing an infrared heater, power calculations must be made taking into account the area of ​​the room, so as not to overpay for unnecessary electricity consumption

Criterias of choice

p, blockquote 1,0,0,0,0 —>

Economical heaters for a home or apartment should be selected taking into account the following criteria:

p, blockquote 2,0,0,0,0 —>

p, blockquote 3,0,0,0,0 —>

Modern manufacturers who really care about consumers and strictly control the quality of their own products always leave serial numbers on their products.

p, blockquote 4,0,0,0,0 —>

Modern manufacturers who really care about consumers and strictly control the quality of their own products always leave serial numbers on their products.

p, blockquote 5,0,0,0,0 —>

p, blockquote 6,0,0,0,0 —>

Since a device such as a heater must withstand high voltage, when purchasing it you need to pay attention to the reliability of the contact connections. This is necessary in order to prevent short circuits during operation of the device.

p, blockquote 7,0,0,0,0 —>

The internal wires of electric heaters must be made of non-flammable and high-quality material - in this case, even in an emergency, they will not burn for more than a minute.

p, blockquote 9,0,0,0,0 —>

p, blockquote 10,0,0,0,0 —>

The main “internal organ” of each electric heater is its heating element. It can be a heating element or a quartz lamp. Regardless of the option chosen, this element must be made of original and durable material.

p, blockquote 11,0,1,0,0 —>

p, blockquote 12,0,0,0,0 —>

It denotes a mark of conformity with European standards. This marking is applied to devices that do not pose any threat to the environment or human health.

p, blockquote 13,0,0,0,0 —>