How to control a gas boiler via the Internet without purchasing expensive equipment

The Russian research and production company
presents a new device for controlling a boiler room via telephone - the
TEPLOCOM GSM
. The company's engineers were able to embody in one small device the capabilities of modern GSM technologies and the simple desire to control the operation of a boiler room from a distance.

Heat informator TEPLOCOM GSM

informs you about the temperature in the rooms, the state of the heating system, possible emergency situations, it allows you to control the switching on of the boiler room via a GSM channel.
TEPLOKOM GSM
heat information device can be installed to control the boiler room of your home, cottage, or office.

Heat informator TEPLOCOM GSM. Main features of the device

The TEPLOCOM GSM heat informer allows you to receive on your mobile phone:

  • information about the presence of voltage in the network;
  • information about the decrease in room temperature below the set value;
  • information about a decrease in coolant temperature below the set value;
  • information about a water leak emergency.

The heat informator allows you to control the boiler room switching mode via a mobile phone. The device has a built-in uninterruptible power supply, which allows it to remain operational for a long time during a power outage.

Operating principle


Controlling a gas boiler from a phone
To remotely control the boiler and monitor its current state, a GSM module is installed - the basis of the control controller.

This monitoring system is intended for prompt notification via mobile telephone channels about current parameter values, violations of the specified operating mode and equipment failures.

READ ALSO: Features of operation and operation of a thermocouple for a gas boiler

Functionality of the GSM module:

  • Control of heating and auxiliary equipment from a distance (using telephone commands in the form of SMS).
  • Provide remote switching off or switching on of the heating boiler.
  • You can set the coolant temperature and other parameters of the heating system.
  • Obtaining data characterizing the current operation of the boiler from temperature sensors.
  • In some situations, the control unit can start additional equipment.

The main task of the module is to control the operation of the heating system in accordance with the specified parameters. If problems occur, the module notifies you via SMS to your mobile phone.

A signal message will be given in the following cases:

  • emergency shutdown of equipment;
  • exceeding the upper specified temperature limits in the boiler and the room where it is installed;
  • triggering of a sensor indicating a gas leak or pressure surge (the signal is accompanied by automatic shutdown of the boiler);
  • activation of connected smoke and flood sensors.

The text of the message changes for each input to the controller. In an emergency, the module issues a message to all phone numbers that were specified during registration.

Heat informator TEPLOCOM GSM. Additional features of the device

Heat informator TEPLOCOM GSM

has a number of additional features. First of all, this is the ability to connect other sensors, for example a pressure sensor in the heating system or a sensor - a gas analyzer in the room. In this case, the device will monitor dangerous excess pressure in the system, which can lead to an accident, and will monitor the concentration of harmful gases in the air in the room.

A motion sensor can also be used as an additional sensor, in which case the device will also begin to perform the function of a simple security alarm. The heat informer will send an SMS to your phone if unknown persons move in the room where the sensor will be installed.

Even if you don’t have a boiler room, a heat exchanger can be useful to you. The device has a relay output that allows you to remotely turn on and off any electrical device by sending a control SMS from your phone. Let's say you have a summer garden house that is not equipped with a heating system. In this case, you can connect an electric radiator to the device and control its operation from a distance. For example, you can turn on the radiator two hours before your arrival at the dacha, and it will warm up the garden house before your arrival.

Remote GSM boiler control

Heating monitoring and control system

GSM boiler control is designed to control the operation of the heating system while being at a certain distance from the building in which it is located. This is an easy way to keep abreast of the current operation of heating equipment, as well as to find out in time about its breakdown. The user will need to install the sensor into the heating system, purchase and install the temperature control device in a convenient location. At the moment when the temperature changes to critical levels, an SMS notification will be sent by phone.

Purpose of the GSM boiler control module

The GSM boiler control module helps to start and stop the heating system using mobile communications, while at work or on vacation. The user will also be able to be informed about the temperature in the room, as well as critical indicators of the coolant via SMS message.

In addition, thanks to the operation of this module, it is possible to record parameters such as coolant temperature, room temperature, system pressure, power value and operating mode. All this is offered at a reasonable price. There are special programs for a mobile device that can greatly simplify and facilitate control of the boiler via the phone.

The main advantages of the GSM module are:

  • ability to work with several phone numbers;
  • the ability to obtain information about the operation of the heating system at a specific moment;
  • function of changing the temperature level of the boiler and water boiler remotely;
  • providing a lithium-ion battery, so that the device can work even when the power goes out.

Due to this, GSM boiler control is very popular today.

Thanks to this module, it is possible to control and regulate the heating system, regardless of the user’s location. You just need to send one SMS from any point, and you can set the required temperature of the coolant supply or the temperature of warm water in the boiler located in the country. Using the device, you can also adjust the functioning of the mixing valves. It can work in conjunction with a controller. The average price of GSM heating control is within 13,000 rubles.

Acquisition

You can order a boiler control system in our online store wholesale and retail. Here you will find a suitable device with the required configuration at the optimal cost, with a description and specifications. You can buy GSM heating boiler control by placing an order on the website or by contacting the manager by phone. The price for remote GSM control of a heating boiler is fully justified and is explained by the appropriate level of product quality, service and service life.

Don't waste your time. We are waiting for your calls today!

Compatibility of the TEPLOCOM GSM heat informator with any types of heating boilers. Easy installation

On the market of modern heat supply equipment, of course, there are devices from Western companies that allow monitoring and control of a boiler room using GSM channels or the Internet. As a rule, these devices are manufactured for specific heating systems and require complex switching with electronic and actuating devices of thermal systems of these brands. In addition, only a specialist can set up such a device. In contrast to them, the TEPLOCOM GSM

It is compatible with any heating boilers and does not require special installation; to install it, simply insert the sensor plugs and plug the device into the network.

Thermal informator reduces heating costs

Heat informator TEPLOCOM

allows you to significantly reduce your heating costs. First of all, it is possible to temporarily turn off heating boilers during periods of time when there is no one in the room. At the same time, it remains possible to control the temperature in the room.

The device can also be useful for automating the operation of small boiler rooms installed in production, warehouse or office premises. In this case, the operating parameters of the boiler room can be transferred to the responsible person and the security service representative. The use of a heat informant in conjunction with a fire alarm system and a video surveillance system will completely eliminate the need for the services of stokers.

The heat informator is of great interest to companies providing maintenance services to several boiler houses. The device will allow you to quickly receive information about the operation of all boiler rooms and promptly eliminate emergency situations.

Popular models

GSM alarm Sapsan
GSM modules must be selected depending on the type of boiler equipment and the requirements for the controller.

The most famous models are:

  • Xital GSM with modifications 4T, 8T and 12T.
  • Sapsan Pro 6 – for any boiler equipment, connection of 10 rooms.
  • Telcom 2 – only for De Dietrich, up to 5 numbers.
  • Vitocom 100 – only for Viessmann, a maximum of two numbers can be connected.
  • Logomatic PRO GSM – only for Buderus, maximum number of numbers – 16 pieces.

READ ALSO: Automatic control of a gas boiler using a room thermostat

Control system "Xital"

In the market of GSM alarms for heating equipment, the undisputed leader is the Xital system.

This is a powerful, comprehensive remote control system because in many cases it covers not only heating, but also home security.

The module accumulates data on the temperature in the room, pool, pressure in the circuits, collects readings from safety sensors, and simultaneously regulates the room temperature within a given range.

GSM module for boiler Xital 4T

There are several modifications of Xital - GSM-4T, GSM-8T and GSM-12T. They differ in the number of control zones - 4, 8 and 12.

Each device has an analog temperature sensor, as well as five external digital sensors that continuously measure temperature. 30 seconds after the sensors are triggered, Xital will send a message to telephone numbers (you can configure the equipment to turn off when an alarm is triggered).

Users can register up to 10 numbers, including regular landline numbers.

High quality and reliability of the device

All products

undergoes strict quality control, products comply with the requirements of GOST of Russia, the uniform requirements of the Customs Union, and European safety requirements.
specializes in the production of electrical equipment for security systems, fire protection systems, communication systems, network protection equipment and heat supply systems.
The company's special products are certified by the Maritime Register of Shipping, the Main Military Directorate of the Ministry of Internal Affairs of the Russian Federation, the Federal Communications Agency of the Russian Federation, and Rostechnadzor of the Russian Federation. The company's quality management system complies with the requirements of the international standard ISO 9001. Production is carried out in accordance with international standards ISO 14001, OHSAS 18001. Electrical equipment for heating systems

has been successfully tested in European technical laboratories of well-known manufacturers.
Engineers from boiler manufacturing companies of such brands as Bosch, Junkers, Vaillant, Baxi, Buderus, Thermona, Gazeco, Termet, Chaffoteaux, Alphatherm, Sime recommend using TEPLOCOM
.

This year the TEPLOCOM GSM

was awarded a gold medal at the prestigious international exhibition
Aqua-Therm 2014
.
is confident in the quality of its products and undertakes extended warranty obligations. The factory warranty period for the device is 5 years.

Boiler control units (BUK) and automation panels

BUK - boiler control unit

Boiler control units have various modifications and are intended for automatic control of boilers or furnaces that operate on liquid or gaseous fuel in accordance with approved regulatory documents.
Boiler control units can have several channels for regulation and measurement. Boiler control units are used in practice for the automatic operation of hot water or steam boiler plants, such as regulation, ignition and their protection, as well as for the automation of asphalt concrete plants, heat generators, furnaces, dryers and other thermal systems using liquid and/or gaseous fuels .

Boiler control units may have the following functionality:

  • monitoring the tightness of valves;
  • auto start and automatic stop, depending on the selected activity algorithm;
  • control of ambient air temperature;
  • automatic adjustment of burner power in accordance with the set temperature or according to the desired heating schedule;
  • automatic regulation and control of vacuum in the furnace;
  • auto-stop of the boiler when the water temperature reaches the upper set value and its subsequent auto-start when the temperature drops to the lower limit;
  • the presence of “day/night” modes, that is, a decrease in the temperature of the coolant at night;
  • sound and light alarms about incidents, as well as emergency shutdown of the boiler;
  • the presence of manual control of the unit using an actuator in the remote control;
  • modification of boiler control units required for customers.

Automation shield

Automation panels range from single-burner to multi-burner and are used in complex supplies of boiler room automation devices and equipment. Automation panels, together with BUK, provide automatic control of all processes.

The switchboard is a cabinet that has built-in devices that are connected in the required manner. Absolutely all available information from the devices is displayed on the front panel of the automation panel. Panels are an integral part of boiler automation systems and can be supplied separately from them.

The automation panel receives signals from technological parameters received from the sensors of the controlled boiler and operator commands. After which he processes them and supplies control signals for magnetic starters.

Automation panels and boiler panels are panel products that are intended for use in automatic process control systems in a variety of production areas and industries. They are also used as devices on which all kinds of equipment and devices for monitoring, regulation, control and power are mounted.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
Для любых предложений по сайту: [email protected]